where k (M− 2 s− 1) can be determined from the
in the pH range 2 to 5, from 5 to 40 °C and 0.01 to 1 M.The effect of pH and ionic strength on the reaction suggest that the rates are due to
where H2A = H2CrO4, HA = HCrO4, H2B = H2SO3 and HB = HSO3. The overall rate expression over the investigated pH range can be determined from
k=kH2A–H2B(αH2A)(αH2B)2+kHA–H2B(αHA)(αH2B)2+kH2A–HB(αH2A)(αHB)2
with kH2A−H2B = 5.0 × 107, kHA–H2B = 1.5 × 106 and kH2A–HB = 6.7 × 107.Fe(III) in the range 1.5 to 20 μM exerts a small catalytic effect on the reaction and significantly lowers the initial concentration of Cr(VI) compared to the nominal value. Contrary to Fe(III), formaldehyde (20 to 200 μM) reacts with S(IV) to form the hydroxymethanesulfonate adduct (CH2OHSO3), which does not react with Cr(VI). Major cations Mg2+ and some minor elements such as Ba2+ and Cu2+ did not affect the rates. The application of this rate law to environmental conditions suggest that this reaction may have a role in acidic solutions (aerosols and fog droplets). This reaction becomes more important in the presence of high Fe(III) and low HMS concentrations, contributing to affect the atmospheric transport of chromium species and the distribution of redox species of chromium, which reach surface water from atmospheric depositions.  相似文献   
1 [2] [3] [4] [5] [6] [7] [8] 下一页 » 末  页»
  首页 | 本学科首页   官方微博 | 高级检索  
文章检索
  按 检索   检索词:      
出版年份:   被引次数:   他引次数: 提示:输入*表示无穷大
  收费全文   77篇
  免费   0篇
  国内免费   1篇
大气科学   1篇
地球物理   3篇
地质学   43篇
海洋学   28篇
自然地理   3篇
  2017年   1篇
  2016年   1篇
  2015年   1篇
  2013年   1篇
  2011年   2篇
  2010年   7篇
  2009年   4篇
  2008年   2篇
  2007年   4篇
  2006年   2篇
  2003年   2篇
  2002年   3篇
  2001年   3篇
  2000年   2篇
  1999年   4篇
  1998年   2篇
  1997年   1篇
  1996年   1篇
  1995年   4篇
  1993年   3篇
  1990年   1篇
  1989年   1篇
  1987年   1篇
  1986年   1篇
  1985年   2篇
  1984年   2篇
  1983年   2篇
  1982年   6篇
  1981年   2篇
  1980年   1篇
  1979年   1篇
  1977年   1篇
  1976年   4篇
  1975年   1篇
  1973年   1篇
  1972年   1篇
排序方式: 共有78条查询结果,搜索用时 31 毫秒
1.
The pK1* and pK2* for the dissociation of carbonic acid in seawater have been determined from 0 to 45°C and S = 5 to 45. The values of pK1* have been determined from emf measurements for the cell:
Pt](1 − X)H2 + XCO2|NaHCO3, CO2 in synthetic seawater|AgC1; Ag
where X is the mole fraction of CO2 in the gas. The values of pK2* have been determined from emf measurements on the cell:
Pt, H2(g, 1 atm)|Na2CO3, NaHCO3 in synthethic seawater|AgC1; Ag
The results have been fitted to the equations:
lnK*1 = 2.83655 − 2307.1266/T − 1.5529413 lnT + (−0.20760841 − 4.0484/T)S0.5 + 0.08468345S − 0.00654208S1
InK*2 = −9.226508 − 3351.6106/T− 0.2005743 lnT + (−0.106901773 − 23.9722/T)S0.5 + 0.1130822S − 0.00846934S1.5
where T is the temperature in K, S is the salinity, and the standard deviations of the fits are σ = 0.0048 in lnK1* and σ = 0.0070 in lnK2*.Our new results are in good agreement at S = 35 (±0.002 in pK1*and ±0.005 in pK2*) from 0 to 45°C with the earlier results of Goyet and Poisson (1989). Since our measurements are more precise than the earlier measurements due to the use of the Pt, H2|AgCl, Ag electrode system, we feel that our equations should be used to calculate the components of the carbonate system in seawater.  相似文献   
2.
The effect of ionic interactions of the major components of natural waters on the oxidation of Cu(I) and Fe(II) has been examined. The various ion pairs of these metals have been shown to have different rates of oxidation. For Fe(II), the chloride and sulfate ion pairs are not easily oxidized. The measured decrease in the rate constant at a fixed pH in chloride and sulfate solutions agrees very well with the values predicted. The effect of pH (6 to 8) on the oxidation of Fe(II) in water and seawater have been shown to follow the rate equation
-d in [Fe(II)]/dt = k1β1αFe/[H+] + k2β2αFe/[H+]2
where k1 and k2 are the pseudo first order rate constants, β1 and β2 are the hydrolysis constants for Fe(OH)+ and Fe(OH)0. The value of αFE is the fraction of free Fe2+. The value of k1 (2.0 ±0.5 min?1) in water and seawater are similar within experimental error. The value of k2 (1.2 × 105 min?1) in seawater is 28% of its value in water in reasonable agreement with predictions using an ion pairing model.For the oxidation of Cu(I) a rate equation of the form
?d ln [Cu(I)]/dt = k0αCu+ k1β1αCu[Cl]
was found where k0 (14.1 sec?1) and k1 (3.9 sec?1) are the pseudo first order rate constants for the oxidation of Cu+ and CuCl0, β1 is the formation constant for CuCl0 and αCu is the fraction of free Cu+. Thus, unlike the results for Fe(II), Cu(I) chloride complexes have measurable rates of oxidation.  相似文献   
3.
The spectrophotometric measurements of chloro complexes of lead in aqueous HCl, NaCl, MgCl2 and CaCl2 solutions at 25°C have been analyzed using Pitzer's specific interaction equations. Parameters for activity coefficients of the complexes PbCl+, PbCl20 and PbCl3? have been determined for the various media. Values of K1 = 30.0 ± 0.6, K2 = 106.7 ± 2.1 and K3 = 73.0 ± 1.5 were obtained for the cumulative formation constants. [Pb2+ + nCl? → PbCln2?n)]. These values are in reasonable agreement with literature data. The Pitzer parameters for the PbCl ion pairs in various media were used to calculate the speciation of Pb2+ in an artificial seawater solution.  相似文献   
4.
Adsorption and Desorption of Phosphate on Calcite and Aragonite in Seawater   总被引:3,自引:0,他引:3  
The adsorption and desorption of phosphate on calcite and aragonite were investigated as a function of temperature (5–45 °C)and salinity (0–40) in seawater pre-equilibrated with CaCO3. An increase in temperature increased the equilibrium adsorption; whereas an increase in salinity decreased the adsorption. Adsorption measurements made in NaCl were lower than the results in seawater. The higher values in seawater were due to the presence of Mg2+ and Ca2+ ions. The increase was 5 times greater for Ca2+ than Mg2+. The effects ofCa2+ and Mg2+ are diminished with the addition of SO4 2- apparently due to the formation of MgSO4 and CaSO4 complexes in solution and/or SO4 2- adsorption on the surface of CaCO3. The adsorbed Ca2+ and Mg2+ on CaCO3 (at carbonate sites) may act as bridges to PO4 3- ions. The bridging effect of Ca2+is greater than Mg2+ apparently due to the stronger interactions of Ca2+ with PO4 3-.The apparent effect of salinity on the adsorption of PO4 was largely due to changes in the concentration of HCO3 - in the solutions. An increase in the concentration of HCO3 - caused the adsorption of phosphate to decrease, especially at low salinities. The adsorption at the same level of HCO3 - (2 mM) was nearly independent of salinity. All of the adsorption measurements were modeled empirically using a Langmuir-type adsorption isotherm[ [PO4]ad = KmCm[PO4]T/(1 +Km [PO4]T) , ]where [PO4]ad and [PO4]T are the adsorbed and total dissolved phosphate concentrations, respectively. The values of Cm (the maximum monolayer adsorption capacity, (mol/g) and Km (the adsorption equilibrium constant, g/(mol) over the entire temperature (t, °C) and salinity (S) range were fitted to[ Cm = 17.067 + 0.1707t - 0.4693S + 0.0082S2 ( = 0.7) ][ ln Km = - 2.412 + 0.0165t - 0.0004St - 0.0008S2 ( = 0.1) ]These empirical equations reproduce all of our measurements of[PO4]ad up to 14 mol/g and within ±0.7 mol/g.The kinetic data showed that the phosphate uptake on carbonate minerals appears to be a multi-step process. Both the adsorption and desorption were quite fast in the first stage (less than 30 min) followed by a much slower process (lasting more than 1 week). Our results indicate that within 24 hours aragonite has a higher sorption capacity than calcite. The differences between calcite and aragonite become smaller with time. Consequently, the mineral composition of the sediments may affect the short-term phosphate adsorption and desorption on calcium carbonate. Up to 80 % of the adsorbed phosphate is released from calcium carbonate over one day. The amount of PO4 left on the CaCO3 is close to the equilibrium adsorption. The release of PO4 from calcite is faster than from aragonite. Measurements with Florida Bay sediments produced results between those for calcite and aragonite. Our results indicate that the calcium carbonate can be both a sink and source of phosphate in natural waters.  相似文献   
5.
In recent years, a number of workers have studied the stability of deep lakes such as Lake Tanganyika, Lake Baikal and Lake Malawi. In this paper, the methods that can be used to determine the effect that the components of lakes have on the equation of state are examined. The PVT properties of Lakes have been determined by using apparent molal volume data for the major ionic components of the lake. The estimated PVT properties (densities, expansibility and compressibilities) of the lakes are found to be in good agreement with the PVT properties (P) of seawater diluted to the same salinity. This is similar to earlier work that showed that the PVT properties of rivers and estuarine waters could also be estimated from the properties of seawater.The measured densities of Lake Tanganyika were found to be in good agreement (± 2 × 10-6 g cm-3) with the values estimated from partial molal properties and the values of seawater at the same total salinity (ST = 0.568). The increase in the densities of Lake Tanganyika waters increased due to changes in the composition of the waters. The measured increase in the measured density (45 × 10-6 g cm-3) is in good agreement (46 × 10-6 g cm-3) with the values calculated for the increase in Na+, HCO3 -, Mg2+, Ca2+ and Si(OH)4.Methods are described that can be used to determine the conductivity salinity of lakes using the equations developed for seawater. By combining these relationships with apparent molal volume data, one can relate the PVT properties of the lake to those of seawater.  相似文献   
6.
The oxidation and reduction of nanomolar levels of copper in air-saturated seawater and NaCl solutions has been measured as a function of pH (7.17–8.49), temperature (5–35 °C) and ionic strength (0.1–0.7 M). The oxidation rates were fitted to an equation valid at different pH and ionic strength conditions in sodium chloride and seawater solutions:
The reduction of Cu(II) was studied in both media for different initial concentrations of copper(II). When the initial Cu(II) concentration was 200 nM, the copper(I) productions were 20% and 9% for NaCl and seawater, respectively. The effect of speciation of copper(I) reduced from Cu(II) on the rates was studied. The Cu(I) speciation is dominated by the CuCl2 species. On the other hand, the neutral chloride CuCl species dominates the Cu(I) oxidation in the range of 0.1 M to 0.7 M chloride concentrations.  相似文献   
7.
西准噶尔包古图地区地层火山岩锆石LA-ICP-MS U-Pb年代学研究   总被引:24,自引:11,他引:13  
包古图地区位于西准噶尔东南部,区内出露地层主要为石炭系太勒古拉组、包古图组和希贝库拉斯组,为一套巨厚的半深海相-大陆坡相火山-火山碎屑沉积建造。这套地层的时代归属和地层层序长期以来一直存在争议。本文报导了包古图地区实测地层剖面,并从太勒古拉组玄武岩和包古图组及希贝库拉斯组凝灰岩中分别选出锆石,进行了LA-ICP-MS U-Pb年代学研究,获得206Pb/238U加权平均年龄分别为357.5±5.4Ma、332.1±3.0Ma和336.3±2.5Ma。由此确定这套地层属于早石炭世的杜内阶到维宪阶,由下到上依次为太勒古拉组、包古图组和希贝库拉斯组。  相似文献   
8.
The dissociation constants (pK1, pK2 and pK3) for cysteine have been measured in seawater as a function of temperature (5 to 45 °C) and salinity (S = 5 to 35). The seawater values were lower than the values in NaCl at the same ionic strength. In an attempt to understand these differences, we have made measurements of the constants in Na–Mg–Cl solutions at 25 °C. The measured values have been compared to those calculated from the Pitzer ionic interaction model. The lower values of pK3 in the Na–Mg–Cl solutions have been attributed to the formation of Mg2+ complexes with Cys2− anions
Mg2+ + Cys2− = MgCys
The stability constants have been fitted to
after corrections are made for the interaction of Mg2+ with H+.The pK1 seawater measurements indicate that H3Cys+ interacts with SO42−. The Pitzer parameters β0(H3CysSO4), β1(H3CysSO4) and C(H3CysSO4) have been determined for this interaction. The formation of CaCys as well as MgCys are needed to account for the values of pK2 and pK3 in seawater.The consideration of the formation of MgCys and CaCys in seawater yields model calculated values of pK1, pK2 and pK3 that agree with the measured values to within the experimental error of the measurements. This study shows that it is important to consider all of the ionic interactions in natural waters when examining the dissociation of organic acids.  相似文献   
9.
The osmotic coefficients of FeCl3 at 25 °C from 0.15 to 1.7 m [Rumyantsev et al., Z. Phys. Chem., 218, 1089-1127, 2004] have been used to determine the Pitzer parameters (β(0), β(1) and C?) for FeCl3. Since the differences in the Pitzer coefficients of rare earths in NaCl and NaClO4 are small, the values of Fe(ClO4)3 have been estimated using the differences between La(ClO4)3 and LaCl3. The Pitzer coefficients for FeCl3 combined with enthalpy and heat capacity data for the rare earths can be used to estimate the activity coefficients of Fe3+ in NaCl over a wide range of temperatures (0 to 50 °C) and ionic strength (0 to 6 m).The activity coefficients of Fe3+ in NaCl and NaClO4 solutions have been used to determine the activity coefficients of Fe(OH)2+ in these solutions from the measured first hydrolysis constants of Fe3+ [Byrne et al., Mar. Chem., 97, 34-48, 2005]. The activity coefficients of , Fe(OH)3 and from 0 to 50 °C have also been determined from the solubility measurements of Fe(III) in NaCl solutions [Liu and Millero, Geochim. Cosmochim Acta, 63, 3487-3497, 1999]. These activity coefficients have been fitted to the Pitzer equations. These results can be used to estimate the speciation of Fe(III) with OH in natural waters with high concentrations of NaCl from 0 to 50 °C.  相似文献   
10.
The rates of the reduction of Cr(VI) with S(IV) were measured in deaerated NaCl solution as a function of pH, temperature and ionic strength. The rates of the reaction were found to be first order with respect to Cr(VI) and second order with respect to S(IV), in agreement with previous results obtained at concentrations two order higher than the present study. The reaction also showed a first-order dependence of the rates on the concentration of the proton and a small influence of temperature with an apparent energy of activation ΔHapp of 22.8 ± 3.4 kJ/mol. The rates were independent of ionic strength from 0.01 to 1 M. The rate of Cr(VI) reduction is described by the general expression
−d[Cr(VI)]/dt=k[Cr(VI)][S(IV)]2
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号